Documentation
TutorialsCommunity

    Cellular Modems Technical Documents and Compliance

    Here, you'll find a comprehensive collection of test reports and documents related to compliance testing for our cellular modules.

    Sixfab cellular modem module options

    Datasheets, AT command references, drivers, firmware updaters and compliance certificates for every cellular module Sixfab ships. Pick a module, then the kind of file you need.

    Telit LE910C4 Mini PCIe LTE Cat 4 Module

    S136 LE910C4-NF S137 LE910C4-EU S139 LE910C4-AP

    An LTE Category 4 module in the standard PCI Express MiniCard form factor, available in single mode and with 3G fallback. Install it on the 3G/4G & LTE Base HAT to bring cellular connectivity to a Raspberry Pi. On the Base HAT this module communicates over USB only.

    Telit LE910C1 Mini PCIe LTE Cat 1 Module

    S128 LE910C1-NF S129 LE910C1-EU

    An LTE Category 1 module in the standard PCI Express MiniCard form factor, available in single mode and with 3G/2G fallback. Install it on the 3G/4G & LTE Base HAT to bring cellular connectivity to a Raspberry Pi. On the Base HAT this module communicates over USB only.

    Telit ME910C1-WW Mini PCIe LTE-M & NB-IoT Module

    S135 ME910C1-WW

    The Cat M1/NB1 member of the Telit xE910 series, specified in 3GPP Release 13. Cat M1 and NB1 devices are built for IoT deployments that need low power draw and deeper coverage rather than high throughput.

    Quectel EG25 / EC25 Mini PCIe 4G LTE Module

    An LTE Category 4 module in the standard PCI Express MiniCard form factor, built for M2M and IoT use, reaching 150 Mbps down and 50 Mbps up. It falls back to EDGE and GSM/GPRS where 4G or 3G coverage is missing. Integrated GNSS uses Qualcomm IZat Gen8C Lite and supports GPS, GLONASS, BeiDou, Galileo and QZSS.

    Quectel EM05-G LTE Cat 4 M.2 Module

    S162 EM05-G

    An LTE Category 4 module in the standard M.2 (NGFF) form factor, built to 3GPP Release 11 and reaching 150 Mbps down and 50 Mbps up. The global EM05-G variant works on LTE-FDD, LTE-TDD, DC-HSDPA, HSPA+, WCDMA and CDMA networks, and the 30 × 42 × 2.3 mm package fits designs where a Mini PCIe card is too large. Firmware can be updated over the air with DFOTA.

    Quectel RM520N-GL 5G Sub-6 M.2 Module

    S159 RM520N-GL

    A 5G module for industrial and commercial deployments, compliant with 3GPP Release 16 and supporting ultra-reliable low-latency communication and high connection density. The M.2 form factor makes it a direct step up from LTE-A, and both 5G NSA and SA modes are supported.

    Quectel RM502Q-AE 5G Sub-6 M.2 Module

    S142 RM502Q-AE

    A 5G module for IoT and eMBB applications, built on 3GPP Release 15 and supporting both 5G NSA and SA modes. In the M.2 form factor it stays pin compatible with Quectel's LTE-A modules, including EM06, EM12-G, EM120R-GL, EM121R-GL and EM160R-GL, which keeps the migration from LTE-A to 5G straightforward.

    Quectel UC20-G Mini PCIe 3G Module

    S16 UC20-G

    A UMTS/HSPA+ module reaching 14.4 Mbps down and 5.76 Mbps up, with worldwide HSPA+ and WCDMA coverage. It falls back to EDGE and GSM/GPRS where 3G coverage is missing.

    Updated 6 days ago

    Did this page help you?